S9 Antennas S9v Service Manual download pdf (Page 49)

DEH-2237ZF/X1R/UC

- How to hold the Mechanism Unit

1.Hold the top and bottom frame.

2.Do not squeeze top frame's front portion too tight,

because it is fragile.

- How to remove the Top and Bottom Frame

1.When the disk is in "clamp" state, unlock Spring A (6

pieces) and Spring B (2 pieces), and unscrew screws

(4 pieces).

2.Unlock each 1 of pawl at the both side of the frame,

then remove the top frame.

3.Remove the Carriage Mechanism part in such way

that; you remove the mechanism part from 3 pieces

of Damper while slowly pulling up the part.

4.Now, the top frame has been removed, and under

this state, fix the genuine Connector again, and eject

the disk.

(Caution)

When you reassemble the Carriage Mechanism part,

apply a bit of alcohol to Dampers.

- How to remove the Guide Arm Assy

1.Unlock the spring (1 piece) at the right side of the

assembly.

2.Unscrew screws (2 pieces), then remove the Screw

Gear Bracket.

3.Shift the Guide Arm Assy to the left and slowly rotate

it to the upper direction.

4.When the Guide Arm Assy rotates approximately 45

degree, shift the Assy to the right side direction and

remove it.

Top Frame

Bottom Frame

Damper

Spring

Screw Gear Bracket

Guide Arm

Assy

Carriage

Mechanism

Part

Do not squeeze.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

No comments

S9 Antennas S9v Service Manual Page 49